Heated Plasma Thin Film Sputtering Machine
1. Desktop plasma sputtering coating machine is specially designed for the preparation of metal coatings such as gold, platinum, indium, silver, etc., and has strong adaptability.
2. The maximum sample size diameter that can be placed on the Desktop plasma sputtering coating machine is 40mm, which can be adapted to a variety of sample types.
3. The Desktop plasma sputtering coating machine has passed CE certification, and the use process is safe and efficient, which improves experimental efficiency.
- Shenyang Kejing
- Shenyang, China
- 10 working days
- 50 sets
- Information
Introduction of Desktop magnetron plasma sputtering coater machine:
GSL-1100X-SPC-12H Heating type lab plasma sputtering coating machine is specially designed for coating metal films (such as gold, platinum, indium, silver, etc.) on substrates. The maximum sample size diameter is 40mm, and the film thickness can reach 300Å. It is particularly suitable for gold plating SEM samples as a conductive electrode.
Main features of Desktop magnetron plasma sputtering coater machine:
1. The lab plasma sputtering coating machine is equipped with a 2L/s double-vane mechanical pump, and the air outlet is equipped with a vertical oil mist filter to filter the oil smoke generated when the vacuum pump is working, reduce the loss of the pump, and protect the environment and human health.
2. The lab plasma sputtering coating machine has passed CE certification.
3. We have been deeply involved in the sample preparation industry for many years. We designed this lab plasma sputtering coating machine to meet the needs of customers for preparing metal films, which meets your actual needs.
Technical parameters of lab plasma sputtering coating machine:
| Product model | GSL-1100X-SPC-12H Heated desktop plasma sputtering coating machine |
| Installation conditions | This Desktop magnetron plasma sputtering coater machine is required to be used at an altitude of less than 1000m, a temperature of 25℃±15℃, and a humidity of 55%Rh±10%Rh. 1. Water: Not required 2. Electricity: AC220V 50Hz, must be well grounded 3. Gas: The chamber of the equipment needs to be filled with argon (purity above 99.99%) for cleaning, and you need to bring your own argon gas cylinder 4. Workbench: size 600mm×600mm×700mm, load-bearing capacity above 50kg 5. Ventilation device: required |
| Technical parameters | 1. Input power: 208V-240V 50Hz/60Hz <3000W 2. Quartz chamber: Ø100mm×130mm 3. Sample stage: Ø60 mm, height adjustable, heated to 600°C 4. Temperature controller: 30-stage programmable temperature controller, temperature control accuracy ±1°C 5. Heating rate: 15°C/min (recommended) 6. Target: 4N gold target, Ø57 mm x 0.12 mm 7. Gas inlet: Equipped with a stainless steel needle valve for argon gas flow, enabling better plasma coating |
| Product specifications | Size: 480mm×320mm×150mm; Weight: 20kg |
| Standard accessories | 1. Gold target 2. Vacuum pump 3. Stainless steel bellows 4. Quick-release clamp |
| Optional accessories | Au, Pt, Ag targets |
Precautions for use of the Desktop Magnetron Plasma Sputtering Coating Machine:
1. The Desktop Magnetron Plasma Sputtering Coating Machine should be cleaned regularly and wiped dry as much as possible. Rinse thoroughly each time to prevent it from becoming increasingly difficult to clean.
2. Inspect and replace worn parts. Regularly inspect and replace vulnerable parts inside the machine, such as electrodes and targets, to ensure performance.
3. Master the process parameters and understand the coating parameters for different materials, adjusting them based on actual conditions.
4. Prevent accidental damage. During operation, be careful to avoid collisions, scratches, and other accidents to ensure the safety of the machine.
5. Regular Maintenance: In addition to daily cleaning, the Lab Plasma Sputtering Coating Machine should also be regularly maintained, such as by checking the vacuum system and electrical system to ensure the machine is in good condition.
About us:
We have accumulated years of experience in the field of laboratory equipment research and development. We not only have a deep understanding of various experimental needs, but also continue to promote technological innovation. Different materials, different samples, and different targets have all been specially developed and designed. Our R&D team works closely and efficiently with multiple scientific research institutions to ensure the high technical level and use effect of the equipment by understanding the needs in real projects.
At the same time, our product line covers multiple fields of laboratory equipment, Cutting and Dicing Saw, Grinding and Polishing Machine, Melting System, Lab Oven, etc. For your different research directions, we have corresponding equipment to assist your project and improve the actual performance and accuracy of the project.
We also have corresponding customized services. Due to the variables in each experiment, we can make additional designs or recommendations based on your situation. Please consult our team for specific details.
