Automatic Slurry Feeder for Feeding Abrasive and Polishing Slurry
SKZD-5 Automatic Slurry Feeder is used for automatic feeding of suspensions and grinding slurry. It is applied in the procedures of rough and fine grinding and polishing of precision grinding machines, and there is no need for slurry container replacement during the entire preparation process.
- Shenyang Kejing
- Shenyang, China
- 10 working days
- 50 sets
- Information
Product Introduction
The SKZD-5 automatic dispenser enables automatic addition of suspensions and automatic dispensing of polishing slurries. It is suitable for coarse grinding, fine grinding, and polishing processes on precision flat grinding machines, allowing the entire preparation process to proceed without changing the liquid bottles.
Main Features
1. After reaching the preset time, the built-in timer of the machine will automatically stop the equipment, making it possible for automatic feeding of grinding and polishing abrasive or slurry.
2. High-precision and high-reproducibility measurement can reduce the consumption of consumables.
3. Microprocessor control system, simple and convenient operation interface
4. Unified measurement of ingredients shortens the time and improves the effect of sample preparation.
5. The machine is equipped with 4 peristaltic pumps, and the four-station system can meet various process requirements without slurry container replacement. Uninterrupted slurry feeding reduces preparation time, thus reducing the amount of consumables required for preparation and significantly reducing the cost of consumables.
6. This machine is equipped with a dry powder abrasive feeding system. The peristaltic pump is used to lift the liquid into the dry powder abrasive container, and the dry powder abrasive is evenly dripped on the grinding plate by the flow of the liquid. The amount of consumable abrasives can be effectively controlled by controlling the liquid flow. Consumable abrasive usage. Abrasive type switching is convenient and quick.
7. Non-spray form
Technical Parameters
Product Name | SKZD-5 Automatic Slurry Feeder | |
Product Model | SKZD-5 | |
| Installation Requirements | 1. Humidity and Temperature: 10–85% RH (non-condensing at 25°C), Temperature: 5–45°C. 2. The surrounding environment should be free of strong vibrations and corrosive gases. 3. External Power Supply: Single-phase AC100–240V, 50/60Hz, standard two- or three-pin socket, 10A (socket must have proper safety grounding). 4. Workbench: Recommended to use on a stable operating table or desktop. 5. Ventilation: Well-ventilated environment; no special ventilation equipment is required. | |
Main Parameters (Specification) | 1. Device Power Port: DC 12V 2A; standard power adapter: IN: AC100–240V, OUT: DC12V 2A 2. Liquid Dispensing Stations (Dispensing Pumps): 4 stations (switchable between positions 1–4) 3. Reagent Bottle Capacity: 500 ml per bottle 4. Dry Powder Abrasive Box Dimensions: L90 × W60 × H27 mm 5. Drive Mode: Precision stepper motor + peristaltic pump 6. Dispensing Method: Peristaltic quantitative dispensing 7. Dispensed Materials: Suspensions, slurry abrasives (dry powder type) 8. Dispensing Silicone Tube Specifications: Outer diameter: Φ3.2 mm, Inner diameter: Φ1.6 mm 9. Suspension Flow Rate: 0.15–6 ml/min (adjustable) 10. Dry Powder Abrasive Flow Rate: 0.16–7.5 ml/min (adjustable) 11. Operation Mode: Timed operation, range: 1–999 min | |
Product Dimension and Weight | Outline Dimension: 230mm (W) × 370mm (D) × 450mm (H) Weight: 11Kg |
|
Warranty
· One year limited with lifetime support (not including rusted parts due to inadequate storage conditions)
Logistics
