SYJ-210 Manual Diamond Blade Saw Detailed Operation Process

SYJ-210 manual diamond blade saw is designed for market demand and is widely used in colleges and universities and research institutes. It is suitable for high-speed cutting of metals, ceramics, glass, rock samples, mineral samples, concrete, and organic materials.

Since SYJ-210 manual diamond blade saw is equipped with a high-precision control system and precise cutting, it is an effective tool for material analysis. Various fixtures can be customized according to the reasonable needs of customers. The equipment can realize the rise or fall of the saw blade, expand the design space of the fixture, and realize that multiple fixtures share one device, so that the processed samples can be cut stably and reliably. This machine is equipped with a safety protection interlocking device. When the protective cover is not closed, the main motor cannot be started. Only when the protective cover is closed, the main motor can be started. The front panel of SYJ-210 manual diamond blade saw is equipped with an emergency stop button, which is convenient for the operator to quickly cut off the power supply of the machine when the equipment is abnormal, which can effectively protect the safety of the operator. In order to allow everyone to operate the equipment better, we have sorted out the complete operation process of SYJ-210 automatic precision cutting machine.

I. Conventional cutting operation process:

Before officially starting the SYJ-210 manual diamond blade saw, complete the basic preparation work first. 1. Connect the drain pipe and install the protective plate; 2. Connect the water inlet pipe and open the protective cover; 3. Put in the saw blade adapter ring and install the saw blade, and rotate the locking nut clockwise to complete the fixation; 4. Install the bench vise clamp, tighten the screws and fix the sample; 5. Connect the power supply and turn on the power switch.

After the SYJ-210 manual diamond blade saw is started, it enters the debugging stage. 6 Click the debugging interface, move the sample together, and move the sample directly under the saw blade; 7. Open the reference line and accurately align the position to be cut; 8. Return to the automatic control interface and set the cutting parameters, such as feed speed, cutting depth, etc.; 9. Turn on the cooling system so that the cooling water flows to both sides of the saw blade and covers the top of the sample; 10. Close the protective cover to ensure safe operation.

After the cutting is ready, 11. Start the spindle and click the run button to start the cutting program. 12. After the cutting is completed, turn off the spindle and power in turn. 13. Clean the coolant and keep the surface of the equipment dry and clean; 14. Remove the vise clamp; 15. Finally, turn the screw counterclockwise to remove the T-slot strip and complete the normal cutting operation process.

II. The process of cutting samples with the sample carrier:

1. Replace different saw blades according to the experimental material, and turn the nut counterclockwise to remove the saw blade.

2. Replace the saw blade adapter ring according to the size of the saw blade and install the saw blade.

3. Heat and paste the fixed sample and fix the sample carrier.

4. When cutting samples with the sample carrier, the z-axis must rise to the upper limit.

5. Move the position to be cut below the reference line.

6. Set the cutting parameters, turn on the cooling water and align the two sides of the saw blade above the sample.

7. Close the protective cover and set the spindle speed.

8. After cutting, open the protective cover to remove the sample.

9. Remove the sample carrier. Clean the coolant, keep the equipment dry and clean, and apply protective oil.

10. Close the protective cover and turn off the power.

Well! This is the end of our introduction to the operation process of SYJ-210 manual diamond blade saw. If you are interested in the operation process of other equipment in the future, you can also contact us at any time and we will provide you with a detailed operation guide.