KSL-1100X-S-H Small Mixing Tube Box Furnace
1. This high temperature electric furnace features a dual-mode design: it can be used as a standard box furnace for conventional heat treatment in an air environment, or as a tube furnace for experiments in a vacuum environment.
2. This high temperature electric furnace is manufactured to extremely high standards, offering greater adaptability to various projects.
3. Our high temperature electric furnace utilizes highly efficient and energy-saving technology, increasing the heating rate and reducing experimental time.
- Shenyang Kejing
- Shenyang, China
- 10 working days
- 50 sets
- Information
Introduction of the High Temperature Electric Furnace:
The KSL-1100X-S-H is a small lab high temperature sintering furnace (a hybrid box/tube furnace). As a simple box furnace, it can heat-treat samples in an air environment; as a tube furnace (high temperature vacuum furnace), it can heat-treat samples in a vacuum or protected atmosphere environment. It uses resistance wire as the heating element, employs a K-type thermocouple and a 30-segment programmable temperature controller. The high temperature electric furnace uses high-purity alumina fiber material, achieving a maximum temperature of 1100 degrees Celsius, with a continuous temperature range of 1000 degrees Celsius and a temperature control accuracy of ±1 degree Celsius. The lab high temperature sintering furnace features small size, light weight, rapid heating and cooling, and energy efficiency. It can also be placed inside a glove box for sample sintering under vacuum and a controlled atmosphere. The lab high temperature sintering furnace is a product used in universities, research institutes, and industrial enterprises for high-temperature sintering, metal annealing, and quality inspection.
Key advantages of a high temperature vacuum furnace:
1. Compact size, lightweight, and energy-efficient; can be operated within a glove box or fume hood.
2. The furnace chamber is made of high-purity alumina fiber, significantly reducing energy loss.
3. The furnace chamber surface is coated with an imported high-temperature alumina coating from the USA, improving heating efficiency and extending service life.
4. A pull-down door design facilitates sample loading and unloading.
5. Equipped with quartz tubes and stainless steel flanges, it allows for heat treatment of samples in a vacuum or protected atmosphere environment.
Note: If placement within a glove box is required, please contact sales personnel in advance, as electrical modifications are necessary.
Technical parameters of a high temperature vacuum furnace:
| Product Model | KSL-1100X-S-H Small Mixing Box/Tube Furnace |
| Main Parameters of lab high temperature sintering furnace | • Maximum Temperature: Maximum Operating Temperature: 1100°C (≤30min) • Working Temperature: 1000°C • Heating Rate: ≦10°C/min • Temperature Control System: Intelligent Temperature Controller. PID 30-Segment Programmable Temperature Control. Thermocouple: Type K Thermocouple. Temperature Control Accuracy: ±1°C. • Heating Zone Dimensions: 130mm (L) * 100mm (W) * 100mm (H) • Rated Power: 1.2KW • Power Supply: AC220V/50HZ • Heating Element: Resistance Wire (Molybdenum-Doped Iron-Chromium-Aluminum Alloy) |
Dimensions of high temperature vacuum furnace: Non-open: 230mm (L) * 200mm (W) * 360mm (H) Open: 230mm (L) * 440mm (W) * 360mm (H) Weight: Approx. 10kg | |
| Quartz Tube: KSL-1100X-S-H: φ50*230mm (single-end open) | |
Vacuum Flange of high temperature vacuum furnace: · One stainless steel vacuum flange with silicone O-ring. · Two stainless steel shut-off valves and one mechanical pressure gauge mounted on the flange. · Inlet: φ6.35mm compression fitting; Outlet: φ8mm pagoda nozzle fitting. · Vacuum level: 10⁻² torr (with mechanical pump). · For higher vacuum levels (<10⁻⁵ torr), domestic or imported high-vacuum units are available. | |
| Compliance | CE Certified, UL or CSA certification is available at extra cost. |
This product breaks traditional boundaries, cleverly combining the advantages of box furnaces and tube furnaces. It can function as a standard box furnace for routine heat treatment in an air environment; and with the included quartz tube and sealing flange, it can be used as a tube furnace.
Why recommend this equipment?
Because it understands your laboratory environment. We know that laboratory bench space is extremely limited, or you may need to conduct anhydrous and oxygen-free experiments in a glove box. The bulky furnaces on the market simply don't fit, or take up too much space.
Our device is a specially designed dual-purpose unit, functioning as both a box furnace and a vacuum furnace, solving two problems for the price of one. Moreover, it heats up extremely quickly, eliminating the need for long preheating times like large furnaces, making it particularly suitable for rapid screening of small samples. It saves both electricity and time, truly designed to improve your research efficiency.
